Enrange LLC is one of the manufacturing leaders for pre-packaged, off the shelf, radio control systems in the industrial market place. The Flex-EX industrial radio control systems are used for controlling remotely operated overhead bridge crane controls, mobile hydraulic equipment, and other industrial machinery safely and effectively. These value packed systems are standard, complete systems that are available in several hand-held versions. The basic system comes complete with the following items: (2) hand-held remote control transmitters, (1) pre-wired radio receiver unit with six feet of cable, operator’s user manual, carrying straps and vinyl slip covers. All sales, service, and support for these units are handled by Enrange LLC, at #5 Four Coins Drive, Canonsburg, PA 15317. Phone 724-746-3313. Feel free to call, we will be here to answer any questions that you may have for any of our radio control products.

Click HERE for the Flex Series brochure

Competitive Advantages exceeds the other “packaged systems”:

• 62 available channels, adjustable without changing the printed circuit board (out dated quartz crystal technology) No need to change dipswitches on receiver, these units have auto-scan. Some competitors have unreliable PLL systems that can’t lock onto designated channels.
• 1 million ID codes, others have 32,000
• Self Adjusting RF, no RF tuning needed
• Advanced processor controls are all high grade quality
• We have pitch and catch, random access, and tandem functions standard, the others do not.
• Removable, durable power key, to control unwanted use. Not fragile.
• Sealed to IP-66 specifications, and chemical resistant, the others are done once wet with water.
• Full Compliance with FCC Part-15 rules. We are transmitting at the correct power levels
• Full system compatibility. All systems work with each other, minimizing spare parts.
• SALES SERVICE and SUPPORT in Canonsburg, Pennsylvania by ENRANGE LLC

Flex 4 Series four button standard radio control system

Trolley-Hoist Transmitter

The Flex 4EX-1S series remote control is the smallest hand-held controller for our Flex EX line. It is a small rugged unit used for material handling, mobile hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The small transmitter size is durable with four buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch. Click here for more... Flex 4EX-1S system details in PDF format

Flex 4EX-MS System

The Enrange Flex 4EX-MS is a configurable 4 button / 8 function radio remote control system which provides a standard cost effective solution to restrictive hard wired control cables. The system has a unique “mode shift”, and the mode status is visible on the transmitter’s LED lights. This system can be used for outdoor applications. The system comes with (2) eight button transmitters, (1) receiver unit, receiver mounting hardware, and manual. Other options include 12-24VDC, 24VAC receiver power voltages, transmitter rechargeable battery system, protective padded case, and custom transmitter labeling. Features: - Removable power key on the transmitter - EZ to operate “Mode Shift” feature - Over 150 field settable functions - Pre-wired receiver with 6’ cable - Arrow and compass directional labels are standard Flex 4EX-MS System Details in PDF format

Flex 8 Series seven or eight button standard radio control system

Crane Control Transmitter

The Flex 8EX series remote control is the mid-size hand-held controller for our Flex EX line. It is a rugged unit used for material handling, overhead crane, hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The transmitter is durable with eight buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch. Click here for more... Flex 8EX system details in PDF format Flex 8EX-MS System The Enrange Flex 8EX-MS is a configurable 8 button / 16 function radio remote control system which provides a standard cost effective solution to restrictive hard wired control cables. The system has a unique “mode shift”, and the mode status is visible on the transmitter’s LED lights. This system can be used for outdoor applications. The system comes with (2) eight button transmitters, (1) receiver unit, receiver mounting hardware, and manual. Other options include 12-24VDC, 24VAC receiver power voltages, transmitter rechargeable battery system, protective cases / rubber boot, and custom transmitter labeling. Features: - Removable power key on the transmitter - EZ to operate “Mode Shift” feature - Over 150 field settable functions - Pre-wired receiver with 6’ cable - Arrow and compass directional labels are standard Flex 8EX-MS System details in PDF format

Flex 8EX-RS System

The Flex 8EX-RS series radio control is the mid-size hand-held controller for our Flex EX-RS line. It has all the same features as our standard Flex 8EX transmitter, except it has special programming to select multiple receiver units at one time, allowing one transmitter to control multiple pieces of equipment. A good example is having independent or simultaneous control of four hoist units or winches with one RS transmitter. The unit can be used for indoor or outdoor applications. The transmitter is durable with eight buttons that are large enough for gloved operators. The additional features include a latching E-stop switch and removable key switch. RS System Example Chart Flex 8EX-RS system details in PDF format

Flex 8EX-T System

The Flex 8EX-T series radio control is the mid-size hand-held controller for our Flex EX-T line. This radio control is used for the tandem control of two bridge cranes. This transmitter can operate two bridge cranes from one wireless controller. This allows one user to maximize the control and lifting power of two bridge cranes. It is a rugged unit used for material handling, overhead crane, hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The transmitter is durable with seven buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch, and a selector switch for switching between two cranes. Click here for more... EX-T System Example Chart Flex 8EX-T system details in PDF format

Flex 12 Series eleven or twelve button standard radio control system

Industrial Equipment Radio Transmitter

The Flex 12EX series radio control is the largest hand-held controller for our Flex EX line. It is a rugged unit used for material handling, overhead crane, hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The transmitter is durable with twelve buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch. Click here for more... Flex 12EX system details in PDF format Flex 12EX-MS System The Enrange Flex 12EX-MS is a configurable 12 button / 24 function radio remote control system which provides a standard cost effective solution to restrictive hard wired control cables. The system has a unique “mode shift”, and the mode status is visible on the transmitter’s LED lights. This system can be used for outdoor applications. The system comes with (2) twelve button transmitters, (1) receiver unit, receiver mounting hardware, and manual. Other options include 12-24VDC, 24VAC receiver power voltages, transmitter rechargeable battery system, protective cases / rubber boot, and custom transmitter labeling. Features: - Removable power key on the transmitter - EZ to operate “Mode Shift” feature - Over 150 field settable functions - Pre-wired receiver with 6’ cable - Arrow and compass directional labels are standard Flex 12EX-MS System details in PDF format

 

Flex 12EX-RS System

The Flex 12EX-RS series radio control is the mid-size hand-held controller for our Flex EX-RS line. It has all the same features as our standard Flex 12EX transmitter, except it has special programming to select multiple receiver units at one time, allowing one transmitter to control multiple pieces of equipment. A good example is having independent or simultaneous control of two bridge cranes and four trolley-hoist units with one RS transmitter. The unit can be used for indoor or outdoor applications. The transmitter is durable with twelve buttons that are large enough for gloved operators. The additional features include a latching E-stop switch and removable key switch. Click here for more... RS System Example Chart Flex 12EX-RS system details in PDF format

Flex 12EX-T System

The Flex 12EX-T series radio control is the mid-size hand-held controller for our Flex EX-T line. This radio control is used for the tandem control of two bridge cranes each with up to 5 motions. This transmitter can operate two bridge cranes from one controller. This allows one user to maximize the control and lifting power of two bridge cranes. It is a rugged unit used for material handling, overhead crane, hydraulic, and industrial applications. The unit can be used for indoor or outdoor applications. The transmitter is durable with eleven buttons that are large enough for gloved operators. The buttons can be field setup to be either momentary or maintained functions. The additional features include a latching E-stop switch and removable key switch, and a selector switch for switching between two cranes. Click here for more... EX-T System Example Chart Flex 12EX-T system details in PDF format